Fire Retardant Paints

Varnishes & Clears

Primers & Sealers

Fabric Coatings

Specialty Construction Products

Heat Resistant Coatings

Aircraft Coatings

Varnishes and Clears

FC No. 6 Clear Wood Sealer

Flame Control No. 6 is a crystal clear, hard, wood sealer, developed primarily for use with Flame Control fire retardant varnishes.

FC No. 66 Clear Wood Sealer – Low VOC Version of FC No. 6

FC No. 166 Class A Intumescent Fire Retardant Varnish

Flame Control No. 166 is a clear, satin finish, fire retardant varnish having a Class “A” Underwriters’ Laboratories flame spread rating. Flame Control No. 166 Class “A”, clear, fire retardant varnish is suitable for use on wall paneling, ceiling panels, wood beams, columns, and other such surfaces, where a Class “A” finish is required, and the natural wood appearance is to be maintained. We do not recommend this product for use on floors, doors, shelving or in areas where there could be exposure to dampness, high humidity, moisture or water, as the coating is somewhat softer than conventional varnishes, and may turn milky if exposed to damp or humid conditions. (see No. 141 for floors). ULC Listed.

FC No. 167 Class A Varnish Topcoat

Flame Control No. 167 overcoat has been tested and rated by the Underwriters’ Laboratories, as an overcoat for Flame Control No. 166 Class “A” Fire Retardant “Intumescent” Varnish. ULC Listed Available in Low-Gloss, Semi-Gloss and Hi-Gloss.

FC No. 129 Class B Fire Retardant Varnish

Flame Control No. 129 Fire Retardant Varnish is a Class “B” fire retardant base coat that is used in conjunction with Flame Control No. 130 Fire Retardant Varnish Overcoat. No. 129 and No. 130 coating system is recommended for use on wood paneling, woodwork, doors, door frames, and other surfaces which are subjected to constant scuffing, handling or may require frequent washing (except floors – see No. 141 for floors). UL Listed.

FC No. 130 Class B Varnish Topcoat

Flame Control No. 130 Class “B” Fire Retardant Varnish Overcoat is primarily designed as a topcoat for Flame Control No. 129 Fire Retardant Varnish Base Coat. No. 130 is available in three sheens, i.e.; low, semi, or hi-gloss.

FC No. 133A Class B Water Based Polyurethane Varnish

Flame Control No. 133A is a water base, fire retardant polyurethane varnish, with a semi-gloss sheen. It is designed for use on all new or previously coated wood surfaces (except floors). The varnish will not leach or turn white with aging or washing.

FC No. 141 Class B Polyurethane Varnish

Flame Control No. 141 is a clear, transparent finish, designed for interior use on gym floors and other wood floor surfaces, where maximum resistance to abrasion, scrubbing and washing is required. No. 141 is also suitable for use on other interior surfaces, such as wood paneling, doors, trim, dadoes, wainscoting, stairs, and concrete floors. It is available in a high-gloss or semi-gloss finish.

FC No. 10 Class B Clear FR Penetrating Exterior Wood Treatment

Flame Control No. 10 is a Class "B" rated fire retardant penetrating wood treatment designed for EXTERIOR use on previously untreated Cedar Shakes and Shingles but will provide protection on most porous wood surfaces.

FC No. 10 Low VOC FR Penetrating Exterior Wood Treatment - Low VOC Version of FC No. 10