Flame Control Fire Retardant Paints Color Chart
No. 20-20A Class A Flat Latex Intumescent Paint
Control No. 20-20A is a latex water based intumescent fire
retardant paint, manufactured in accordance with Federal Specification
TT-P-001932. This product is designed for use on interior surfaces
where it is either necessary or desirous to reduce the surface
burning characteristics of the substrate. ULC /ULI Listed.
Also availabe in Black
No. 40-40A Class A Low Gloss Latex Paint
Control No. 40-40A is a low-gloss general-purpose latex water
based coating that is fire rated over noncombustible surfaces,
and as an overcoat for Flame Control intumescent fire retardant
paints. It dries quickly to yield a highly cleansable-scrubbable,
water resistant film that possesses excellent adhesion, flexibility,
and toughness. Also available in a semi-gloss finish. ULC/ULI Listed.
No. 400 Semi-gloss Acrylic
Flame Control No. 400 Semi-gloss Acrylic is a Class “A” rated, waterbase, general purpose, fire resistant paint, designed for use on all interior and exterior surfaces, except floors, where maximum durability coupled with fire resistancy is required. No. 400 may be utilized as an overcoat on most intumescent type fire retardant coatings to improve their cleansibility, scrubbability, and overall durability.
No. 50-50 Intumescent Ignition Barrier Coating for Polyurethane Foam Kote, Flat Latex
Control No. 50-50 Foam Kote is a VOC compliant, water baseed intumescent
fire retardant coating, manufactured expressly for the thermal
protection of polyurethane foam insulation.
FC No. 50-50A Intumescent Ignition Barrier Coating for Polyurethane Foam Kote, Flat Latex
Flame Control No. 50-50A Foam Kote is a VOC compliant, water based intumescent fire retardant coating, manufactured expressly for the thermal protection of polyurethane foam insulation. Coverage rates are better than our original 50-50.
No. 320A Flat Latex Intumescent
Control No. 320A is a Class "A" rated intumescent
type, fire retardant latex water based paint, designed for
interior use on surfaces where it is either necessary or desirous
to reduce the surface burning characteristics of the substrate.
No. 20 SRC Skid Resistant Floor Coating
Control No. 20 SRC is a specially formulated, single component,
low-gloss, acrylic latex floor coating, for use on new and previously
painted floors, stairs, and ramps subject to heavy traffic,
where resistance to skidding is required.
FC No. 10-10 Class A Flat Intumescent Paint (Mineral Spirit based)
Flame Control No. 10-10 fire retardant paint is manufactured in accordance with Federal Specification TT-P-26C. It is designed for use on interior surfaces. The coating dries quickly to a velvety flat finish, having the appearance
FC No. 10-10A Class A Flat Intumescent Paint
(Mineral Spirit based) - Low VOC version of FC No. 10-10
Also available in aerosol cans.
No. 30-30 Class A Semi-Gloss Enamel (Mineral Spirit based)
Control No. 30-30 Semi-gloss Class "A" Fire Retardant
Enamel is a non-yellowing interior paint, which is recommended
for use as an overcoat in areas where maximum cleansibility,
durability, and fire retardancy is required.
No. 111 Class A Intumescent Fire Retardant Paint (Mineral Spirit based)
Control No. 111 Black Fire Retardant Paint is manufactured in
accordance with Federal Specification TTP-26C. It is designed
for use on interior surfaces.
FC No. 46081 Fire Retardant Thermal Insulating Epoxy Coating
Flame Control No. 46081 is a Class "B" two component (catalytic epoxy) thermal insulating (intumescent) semi-gloss fire retardant paint. This product is manufactured in accordance with the United States Military Specification Mil- C-46081A. The coating is designed for use on Naval & Marine vessels, military & commercial aircraft, offshore drilling rigs, fuel tanks & storage vessels, ammunition crates, missiles, warheads and other surfaces where it is essential to obtain the maximum thermal insulating protection under the severest of fire conditions.
Flame Control NO. 149 Class “A” Exterior Intumescent Fire Retardant Paint
Flame Control NO. 149 is a highly flexible, weather resistant, exterior intumescent fire retardant paint. This product was primarily designed for use on wood or metal crating and containers used for the transportation, and disposal of highly hazardous substances.